|
| Project
Information |
|
Project
Name*
Project
Location*
What
is the wastewater source?
Municipal
Industrial
If
industrial, then please describe:
|
A.
Design Data |
|
(Values in parentheses
are suggested for use if actual values are not known)
| 1.
Raw Waste BOD5,
ppm |
|
|
|
|
| 2.
Effluent BOD5,
ppm |
|
|
|
|
| 3.
Raw Waste NH3,
ppm |
|
|
|
|
| 4.
Effluent NH3,
ppm |
|
|
|
|
| 5.
Oxygen Requirement, oxygen to BOD5
ratio |
|
|
|
(2) |
| 6.
Oxygen Requirement, oxygen to NH3
ratio |
|
|
|
(4.6) |
| 7.
Site Elevation, feet MSL |
|
|
|
|
| 8.
Water Temperature, Degrees F. |
|
|
|
|
| 9.
Air Temperature, Degrees F. |
|
|
|
|
| 10.
Alpha Factor |
|
|
|
(0.65) |
| 11.
Beta Factor |
|
|
|
(0.95) |
| 12.
Residual Oxygen, ppm |
|
|
|
(2.0) |
| 13.
Design Flow, gallons per minute |
|
|
|
|
| 14.
Peak Flow, gpm (For Grit Chambers Only) |
|
|
|
|
|
B.
Needs and Preferences |
|
|
(Please state "Yes" or "No" and explain)
|
C.
Aeration Basin Dimensions |
|
Attach
drawings, spreadsheets, etc. detailing your project.
To do this, click the following “Browse” button
to find the file in your computer. Double click
the name of the file and it will appear beside the
browse button on the questionnaire. Repeat as necessary
to send multiple files. When you submit the questionnaire,
the files will be attached.
If
you prefer to fax your information, send it to 281-754-4039.
Please be sure that the drawings include the number
of basins, basin dimensions and water depth. Show
the location of the compressors and describe the
material used to construct the basins. It is helpful
for us to know whether the basins will be newly
constructed, steel tanks have concrete floors, earthen
lagoons have synthetic liners, and basin floors
are flat. Show the location of basin inlets and
outlets and how multiple basins are arranged for
parallel or sequential operation.
Filename:
|
D.
Contact Information |
Name*
Affiliation*
Address
Country
Email*
(* denotes required fields) |
|
|